The first thing user should do is to associate application with GCM files. It may happen so that even when an application that supports GCM files is installed on the system it is not properly associated with this file format. This can be easily remedied by associating program with GCM files. GCM file extension Information that help open, edit, and convert.GCM file. When there is a problem with opening files with the extension.GCM you do not need to immediately use the services of the IT expert.
- File type:
- Developer:
- Popularity:
- Category:
How to open GCM file?
AES GCM always generates a nonce that is 16 bytes long, so calling.read(16) will get the nonce out of the encrypted file. Create a new AES decryption instance using the key and the nonce. Read the encrypted file bit-by-bit and decrypt, then output each part to the output file. Nintendont (sometimes misspelled as Nintendon't) is a GameCube USB loader for Wii and Wii U.Unlike the earlier DIOS MIOS, it loads games in Wii Mode rather than GameCube mode, which allows it to support additional controllers and brings several other enhancements.
After double-clicking on the unknown file icon, the system should open it in the default software that supports it. If this does not happen, download and install the Dolphin software and then manually associate the file with it.
Step 1. Download and install Dolphin
If there is no Dolphin or similar software in the system that supports files with the GCM extension, you must first download and install it. Below you will find a list of the most-used applications that work with GCM. After going to the subpage of the program you will find a link to the developer's website, where you can safely download the software installer.
Programs that open files GCM
MAC OS
Step 2. Associate Dolphin with the GCM file extension
If the user already has one of the applications installed, the next step will be to associate it with the file extension GCM. This can be done in two ways - one is to manually edit the Windows Registry and HKEY_CLASSES_ROOT keys. The second way is simpler and definitely recommended for less advanced users.
- Right click on the unknown GCM file you want to open
- Select 'Open with' from the menu
- Click 'Choose another application'
- Click 'More applications'
- Click 'Find more applications on this PC' and indicate the installation location of the appropriate program
- Finally, select the 'Always use the selected program to open GCM files' option and confirm the whole operation.
Remember! Manually editing the system registry is only recommended for advanced users, and changes made to it without proper knowledge may result in damage to the system.
Step 3. Check out other possible problems related to GCM files.
Sometimes it happens that despite having the right application and the correct configuration, there are still problems with opening the GCM files. You should then find out what is the reason of the problem.
- Check if the GCM file is not infected - When the file GCM is infected with a virus or malware, it probably will not be able to be opened correctly. In this case, scan the GCM file and take the actions recommended by the antivirus program installed on the system. Most often it is disinfection or deletion of an infected file.
- Check if you, as the operating system user, have appropriate permissions to work with the file GCM
- Check if the icon is an element of the correct file but not only a shortcut to the location where the GCM file no longer exists.
- Check that the system has the necessary resources to run the Dolphin application and open the GCM file.
- Check if the file is complete - Sometimes it happens that the GCM file was not copied completely from the external Flash memory, or downloaded from the Internet. When the file is incomplete, it is not possible to open it correctly. In this case, please download or copy the file GCM again.
Step 4. Contact an IT expert
When all of the above methods have failed, it remains to contact an IT specialist or developers of the DOLPHIN program.
File extensions similar to GCM
Syntax
Description
The Get-Command
cmdlet gets all commands that are installed on the computer, including cmdlets,aliases, functions, filters, scripts, and applications. Get-Command
gets the commands fromPowerShell modules and commands that were imported from other sessions. To get only commands thathave been imported into the current session, use the ListImported parameter.
Without parameters, Get-Command
gets all of the cmdlets, functions, and aliases installed on thecomputer. Get-Command *
gets all types of commands, including all of the non-PowerShell files inthe Path environment variable ($env:Path
), which it lists in the Application command type.
Gcm File To Iso File
Get-Command
that uses the exact name of the command, without wildcard characters, automaticallyimports the module that contains the command so that you can use the command immediately. To enable,disable, and configure automatic importing of modules, use the $PSModuleAutoLoadingPreference
preference variable. For more information, see about_Preference_Variables.
Get-Command
gets its data directly from the command code, unlike Get-Help
, which gets itsinformation from help topics.
Starting in Windows PowerShell 5.0, results of the Get-Command
cmdlet display a Version columnby default. A new Version property has been added to the CommandInfo class.
Examples
Example 1: Get cmdlets, functions, and aliases
This command gets the PowerShell cmdlets, functions, and aliases that are installed on the computer.
Example 2: Get commands in the current session
This command uses the ListImported parameter to get only the commands in the current session.
Example 3: Get cmdlets and display them in order
This command gets all of the cmdlets, sorts them alphabetically by the noun in the cmdlet name, andthen displays them in noun-based groups. This display can help you find the cmdlets for a task.
Example 4: Get commands in a module
This command uses the Module parameter to get the commands in the Microsoft.PowerShell.Securityand Microsoft.PowerShell.Utility modules.
Example 5: Get information about a cmdlet
This command gets information about the Get-AppLockerPolicy
cmdlet. It also imports theAppLocker module, which adds all of the commands in the AppLocker module to the currentsession.
When a module is imported automatically, the effect is the same as using the Import-Module cmdlet.The module can add commands, types and formatting files, and run scripts in the session. To enable,disable, and configuration automatic importing of modules, use the $PSModuleAutoLoadingPreference
preference variable. For more information, see about_Preference_Variables.
Example 6: Get the syntax of a cmdlet
This command uses the ArgumentList and Syntax parameters to get the syntax of theGet-ChildItem
cmdlet when it is used in the Cert: drive. The Cert: drive is a PowerShell drivethat the Certificate Provider adds to the session.
When you compare the syntax displayed in the output with the syntax that is displayed when you omitthe Args (ArgumentList) parameter, you'll see that the Certificate provider adds a dynamicparameter, CodeSigningCert, to the Get-ChildItem
cmdlet.
For more information about the Certificate provider, see about_Certificate_Provider.
Example 7: Get dynamic parameters
The command in the example uses the Get-DynamicParameters
function to get the dynamic parametersthat the Certificate provider adds to the Get-ChildItem
cmdlet when it is used in the Cert: drive.
The Get-DynamicParameters
function in this example gets the dynamic parameters of a cmdlet. Thisis an alternative to the method used in the previous example. Dynamic parameter can be added to acmdlet by another cmdlet or a provider.
Example 8: Get all commands of all types
This command gets all commands of all types on the local computer, including executable files in thepaths of the Path environment variable ($env:path
).
It returns an ApplicationInfo object (System.Management.Automation.ApplicationInfo) for eachfile, not a FileInfo object (System.IO.FileInfo).
Example 9: Get cmdlets by using a parameter name and type
This command gets cmdlets that have a parameter whose name includes Auth and whose type isAuthenticationMechanism.
You can use a command like this one to find cmdlets that let you specify the method that is used toauthenticate the user.
The ParameterType parameter distinguishes parameters that take an AuthenticationMechanismvalue from those that take an AuthenticationLevel parameter, even when they have similar names.
Example 10: Get an alias
This example shows how to use the Get-Command
cmdlet with an alias.
Although it is typically used on cmdlets and functions, Get-Command
also gets scripts, functions,aliases, and executable files.
The output of the command shows the special view of the Name property value for aliases. Theview shows the alias and the full command name.
Example 11: Get Syntax from an alias
This example shows how to get the syntax along with the standard name of an alias.
The output of the command shows the labeled alias with the standard name, followed by the syntax.
Example 12: Get all instances of the Notepad command
This example uses the All parameter of the Get-Command
cmdlet to show all instances of theNotepad
command on the local computer.
The All parameter is useful when there is more than one command with the same name in thesession.
Beginning in Windows PowerShell 3.0, by default, when the session includes multiple commands withthe same name, Get-Command
gets only the command that runs when you type the command name. Withthe All parameter, Get-Command
gets all commands with the specified name and returns them inexecution precedence order. To run a command other than the first one in the list, type the fullyqualified path to the command.
For more information about command precedence, see about_Command_Precedence.
Example 13: Get the name of a module that contains a cmdlet
This command gets the name of the module in which the Get-Date
cmdlet originated.The command uses the ModuleName property of all commands.
This command format works on commands in PowerShell modules, even if they are not imported into thesession.
Example 14: Get cmdlets and functions that have an output type
This command gets the cmdlets and functions that have an output type and the type of objects thatthey return.
The first part of the command gets all cmdlets. A pipeline operator (|
) sends the cmdlets to theWhere-Object
cmdlet, which selects only the ones in which the OutputType property ispopulated. Another pipeline operator sends the selected cmdlet objects to the Format-List
cmdlet,which displays the name and output type of each cmdlet in a list.
The OutputType property of a CommandInfo object has a non-null value only when the cmdletcode defines the OutputType attribute for the cmdlet.
Example 15: Get cmdlets that take a specific object type as input
This command finds cmdlets that take net adapter objects as input. You can use this command formatto find the cmdlets that accept the type of objects that any command returns.
The command uses the PSTypeNames intrinsic property of all objects, which gets the types thatdescribe the object. To get the PSTypeNames property of a net adapter, and not thePSTypeNames property of a collection of net adapters, the command uses array notation to get thefirst net adapter that the cmdlet returns.
Example 16: Get commands using a fuzzy match
In this example, the name of the command deliberately has a typo as 'get-commnd'.Using the -UseFuzzyMatching
switch, the cmdlet determined that the best matchwas Get-Command
followed by other native commands on the system that were asimilar match.
Parameters
Indicates that this cmdlet gets all commands, including commands of the same type that have the samename. By default, Get-Command
gets only the commands that run when you type the command name.
For more information about the method that PowerShell uses to select the command to run whenmultiple commands have the same name, see about_Command_Precedence.For information about module-qualified command names and running commands that do not run by defaultbecause of a name conflict, see about_Modules.
This parameter was introduced in Windows PowerShell 3.0.
In Windows PowerShell 2.0, Get-Command
gets all commands by default.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Accept pipeline input: | True |
Accept wildcard characters: | False |
Specifies an array of arguments. This cmdlet gets information about a cmdlet or function when it isused with the specified parameters ('arguments'). The alias for ArgumentList is Args.
To detect dynamic parameters that are available only when certain other parameters are used, set thevalue of ArgumentList to the parameters that trigger the dynamic parameters.
To detect the dynamic parameters that a provider adds to a cmdlet, set the value of theArgumentList parameter to a path in the provider drive, such as WSMan:, HKLM:, or Cert:. Whenthe command is a PowerShell provider cmdlet, enter only one path in each command. The providercmdlets return only the dynamic parameters for the first path the value of ArgumentList. Forinformation about the provider cmdlets, see about_Providers.
Type: | Object[] |
Aliases: | Args |
Position: | 1 |
Default value: | None |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Specifies the types of commands that this cmdlet gets. Enter one or more command types. UseCommandType or its alias, Type. By default, Get-Command
gets all cmdlets, functions, andaliases.
The acceptable values for this parameter are:
Alias
: Gets the aliases of all PowerShell commands. For more information, see about_Aliases.All
: Gets all command types. This parameter value is the equivalent ofGet-Command *
.Application
: Gets non-PowerShell files in paths listed in the Path environmentvariable ($env:path
), including .txt, .exe, and .dll files. For more information about thePath environment variable, see about_Environment_Variables.Cmdlet
: Gets all cmdlets.ExternalScript
: Gets all .ps1 files in the paths listed in the Path environment variable($env:path
).Filter
andFunction
: Gets all PowerShell advanced and simple functions and filters.Script
: Gets all script blocks. To get PowerShell scripts (.ps1 files), use theExternalScript
value.
These values are defined as a flag-based enumeration. You can combine multiple values together toset multiple flags using this parameter. The values can be passed to the CommandType parameteras an array of values or as a comma-separated string of those values. The cmdlet will combine thevalues using a binary-OR operation. Passing values as an array is the simplest option and alsoallows you to use tab-completion on the values.
Type: | CommandTypes |
Aliases: | Type |
Accepted values: | Alias, Function, Filter, Cmdlet, ExternalScript, Application, Script, Workflow, Configuration, All |
Position: | Named |
Default value: | None |
Accept pipeline input: | True |
Accept wildcard characters: | False |
Specifies modules with names that are specified in the form of ModuleSpecification objects,described in the Remarks section of ModuleSpecification Constructor (Hashtable).For example, the FullyQualifiedModule parameter accepts a module name that is specified in oneof the following formats:
@{ModuleName = 'modulename'; ModuleVersion = 'version_number'}
@{ModuleName = 'modulename'; ModuleVersion = 'version_number'; Guid = 'GUID'}
ModuleName and ModuleVersion are required, but Guid is optional.
You cannot specify the FullyQualifiedModule parameter in the same command as a Moduleparameter. The two parameters are mutually exclusive.
Type: | ModuleSpecification[] |
Position: | Named |
Default value: | None |
Accept pipeline input: | True |
Accept wildcard characters: | False |
Indicates that this cmdlet gets only commands in the current session.
Starting in PowerShell 3.0, by default, Get-Command
gets all installed commands, including, butnot limited to, the commands in the current session. In PowerShell 2.0, it gets only commands in thecurrent session.
This parameter was introduced in Windows PowerShell 3.0.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Accept pipeline input: | True |
Accept wildcard characters: | False |
Specifies an array of modules. This cmdlet gets the commands that came from the specified modules.Enter the names of modules or module objects.
This parameter takes string values, but the value of this parameter can also be a PSModuleInfoobject, such as the objects that the Get-Module
and Import-PSSession
cmdlets return.
Type: | String[] |
Aliases: | PSSnapin |
Position: | Named |
Default value: | None |
Accept pipeline input: | True |
Accept wildcard characters: | True |
Specifies an array of names. This cmdlet gets only commands that have the specified name. Enter aname or name pattern. Wildcard characters are permitted.
To get commands that have the same name, use the All parameter. When two commands have the samename, by default, Get-Command
gets the command that runs when you type the command name.
Type: | String[] |
Position: | 0 |
Default value: | None |
Accept pipeline input: | True |
Accept wildcard characters: | True |
Specifies an array of command nouns. This cmdlet gets commands, which include cmdlets, functions,and aliases, that have names that include the specified noun. Enter one or more nouns or nounpatterns. Wildcard characters are permitted.
Gcm File Converter
Type: | String[] |
Position: | Named |
Default value: | None |
Accept pipeline input: | True |
Accept wildcard characters: | True |
Specifies an array of parameter names. This cmdlet gets commands in the session that have thespecified parameters. Enter parameter names or parameter aliases. Wildcard characters are supported.
The ParameterName and ParameterType parameters search only commands in the current session.
.gcm Files For Dolphin
This parameter was introduced in Windows PowerShell 3.0.
Type: | String[] |
Position: | Named |
Default value: | None |
Accept pipeline input: | False |
Accept wildcard characters: | True |
Gcm File
Specifies an array of parameter names. This cmdlet gets commands in the session that have parametersof the specified type. Enter the full name or partial name of a parameter type. Wildcard charactersare supported.
The ParameterName and ParameterType parameters search only commands in the current session.
This parameter was introduced in Windows PowerShell 3.0.
Type: | PSTypeName[] |
Position: | Named |
Default value: | None |
Accept pipeline input: | False |
Accept wildcard characters: | True |
Indicates that this cmdlet displays command information.
This parameter was introduced in Windows PowerShell 5.0.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Indicates that this cmdlet gets only the following specified data about the command:
- Aliases. Gets the standard name and syntax.
- Cmdlets. Gets the syntax.
- Functions and filters. Gets the function definition.
- Scripts and applications or files. Gets the path and filename.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Accept pipeline input: | True |
Accept wildcard characters: | False |
Specifies the number of commands to get. You can use this parameter to limit the output of acommand.
Type: | Int32 |
Position: | Named |
Default value: | None |
Accept pipeline input: | True |
Accept wildcard characters: | False |
Indicates using matching of the characters in the command to find with uppercase charactersin a command. For example, i-psdf
would match Import-PowerShellDataFile
as each ofthe characters to find matches an uppercase character in the result. When using thistype of match, any wildcards will result in no matches.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Accept pipeline input: | True |
Accept wildcard characters: | False |
Indicates using a fuzzy matching algorithm when finding commands. The order of the output is fromclosest match to least likely match. Wildcards should not be used with fuzzy matching as it willattempt to match commands that may contain those wildcard characters.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Specifies an array of command verbs. This cmdlet gets commands, which include cmdlets, functions,and aliases, that have names that include the specified verb. Enter one or more verbs or verbpatterns. Wildcard characters are permitted.
Type: | String[] |
Position: | Named |
Default value: | None |
Accept pipeline input: | True |
Accept wildcard characters: | True |
Inputs
You can pipe command names to this cmdlet.
Outputs
This cmdlet returns objects derived from the CommandInfo class. The type of object that isreturned depends on the type of command that Get-Command
gets.
Represents aliases.
Represents applications and files.
Represents cmdlets.
Represents functions and filters.
Notes
- When more than one command that has the same name is available to the session,
Get-Command
returns the command that runs when you type the command name. To get commands that have the samename, listed in run order, use the All parameter. For more information, seeabout_Command_Precedence. - When a module is imported automatically, the effect is the same as using the
Import-Module
cmdlet. The module can add commands, types and formatting files, and run scripts in the session.To enable, disable, and configuration automatic importing of modules, use the$PSModuleAutoLoadingPreference
preference variable. For more information, seeabout_Preference_Variables.